Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM A1031/A1031M-12 1.5.2012 Ansicht

Ergänzende Informationen

ASTM A1031/A1031M-12

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

Automatische name übersetzung:

Standard-Spezifikation für Stahl, Bleche und Bänder, Schwer Dicke Spulen, Alloy, Zeichnung Stahl und Baustahl, warmgewalzt

NORM herausgegeben am 1.5.2012

Sprache
Realisierung	PDF - sofortiges Download - 70.10 € Gedruckt - 70.10 €
Zugänglichkeit	AUF LAGER
Preis	70.10 € ohne MWS
70.10 €

Informationen über die Norm:

Bezeichnung normen: ASTM A1031/A1031M-12
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.5.2012
SKU: NS-1141
Zahl der Seiten: 4
Gewicht ca.: 12 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Kategorie - ähnliche Normen:

Flat steel products and semi-products

Die Annotation des Normtextes ASTM A1031/A1031M-12 :

Keywords:

alloy steel sheet, alloy steel strip, alloy structural steel, drawing steel, heavy-thickness coils, hot-rolled alloy steel, Drawing steel (DS) sheet/strip--specifications, Heavy-thickness steel coils--specifications, Hot-rolled steel sheet/strip--specifications, Steel sheet/strip--structural, ICS Number Code 77.140.50 (Flat steel products and semi-products)

Ergänzende Informationen

1. Scope

1.1 This specification covers hot-rolled, heavy thickness coils beyond the size limits of Specifications A506 and A507.

1.2 The product is available in three designations: Alloy Steel, Drawing Steel, and Structural Alloy Steel.

1.3 Alloy steel is furnished to chemical composition requirements and is intended primarily for general or miscellaneous use where bending and moderate forming is a requirement.

1.4 Drawing steel is produced principally for applications involving severe cold plastic deformation such as deep drawn or severely formed parts.

1.4.1 Drawing steel may be furnished in several conditions, heat treatments, surface finishes, and edges, as specified herein.

1.5 Structural steel is furnished to chemical composition requirements and to specific mechanical property requirements which may include tension tests, hardness tests, or other commonly accepted mechanical tests.

1.5.1 The formability of structural steel decreases with increasing yield strength or hardness. Therefore, product design in relation to the mechanical properties of the grade used must be considered.

1.6 This material is available only in coils described as follows:

Product	Size Limits, Coils Only
Product	Width, in. [mm]	Thickness, in. [mm]
Strip	Over 8 to 12, incl	0.230 to 1.000, incl
	[Over 200 to 300]	[Over 6.0 to 25]
Sheet	Over 12	0.230 to 1.000, incl
	[Over 300]	[from 6.0 through 25]

1.7 Sheet and strip in coils of sizes noted in 1.6 are covered by this specification only with the following provisions:

1.7.1 The material is not to be converted into steel plates for structural or pressure vessel use unless tested in complete accordance with the appropriate sections of Specifications A6/A6M (plates provided from coils) or A20/A20M (plates produced from coils). A plate produced in this manner is no longer governed by this sheet steel specification and since this material is now plate, the appropriate plate standard must now apply.

1.7.2 The dimensional tolerances of Specification A635/A635M are applicable to material produced to this specification.

1.7.3 The material is to be fed directly from coils into a blanking press, drawing or forming operation, tube mill, rolling mill, or sheared or slit into blanks for subsequent drawing or forming.

1.8 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.8.1 Within the text the SI units are shown in brackets.

TABLE 1 Standard Steels Commonly Produced for Alloy Steel Sheet and Strip

Steel Designation No.	Chemical Composition Ranges and Limits, % (Heat Analysis)^A
Steel Designation No.	C	Mn	P	S	Si^B	Ni	Cr	Mo	V
E3310^C	0.08-0.13	0.45-0.60	0.025	0.025	0.15-0.30	3.25-3.75	1.40-1.75	. . .	. . .
4012^C	0.09-0.14	0.75-1.00	0.025	0.025	0.15-0.30	. . .	. . .	0.15-0.25	. . .
4118	0.18-0.23	0.70-0.90	0.025	0.025	0.15-0.30	. . .	0.40-0.60	0.08-0.15	. . .
4130	0.28–0.33	0.40–0.60	0.025	0.025	0.15-0.30	. . .	0.80–1.10	015–0.25	. . .
4135	0.33-0.38	0.70-0.90	0.025	0.025	0.15-0.30	. . .	0.80-1.10	0.15-0.25	. . .
4137	0.35-0.40	0.70-0.90	0.025	0.025	0.15-0.30	. . .	0.80-1.10	0.15-0.25	. . .
4140	0.38–0.43	0.75–1.00	0.025	0.025	0.15-0.30	. . .	0.80–1.10	0.15-0.25	. . .
4142	0.40-0.45	0.75-1.00	0.025	0.025	0.15-0.30	. . .	0.80-1.10	0.15-0.25	. . .
4145	0.43-0.48	0.75-1.00	0.025	0.025	0.15-0.30	. . .	0.80-1.10	0.15-0.25	. . .
4147^C	0.45-0.50	0.75-1.00	0.025	0.025	0.15-0.30	. . .	0.80-1.10	0.15-0.25	. . .
4150	0.48-0.53	0.75-1.00	0.025	0.025	0.15-0.30	. . .	0.80-1.10	0.15-0.25	. . .
4320	0.17-0.22	0.45-0.65	0.025	0.025	0.15-0.30	1.65-2.00	0.40-0.60	0.20-0.30	. . .
4340	0.38–0.43	0.60–0.80	0.025	0.025	0.15-0.30	1.65-2.00	0.70–0.90	0.20-0.30	. . .
E4340	0.38-0.43	0.65-0.85	0.025	0.025	0.15-0.30	1.65-2.00	0.70-0.90	0.20-0.30	. . .
4520^C	0.18-0.23	0.45-0.65	0.025	0.025	0.15-0.30	. . .	. . .	0.45-0.60	. . .
4615	0.13-0.18	0.45-0.65	0.025	0.025	0.15-0.30	1.65-2.00	. . .	0.20-0.30	. . .
4620	0.17-0.22	0.45-0.65	0.025	0.025	0.15-0.30	1.65-2.00	. . .	0.20-0.30	. . .
4718	0.16-0.21	0.70-0.90	0.025	0.025	0.15-0.30	0.90-1.20	0.35-0.55	0.30-0.40	. . .
4815	0.13-0.18	0.40-0.60	0.025	0.025	0.15-0.30	3.25-3.75	. . .	0.20-0.30	. . .
4820	0.18-0.23	0.50-0.70	0.025	0.025	0.15-0.30	3.25-3.75	. . .	0.20-0.30	. . .
5015	0.12-0.17	0.30-0.50	0.025	0.025	0.15-0.30	. . .	0.30-0.50	. . .	. . .
5046	0.43-0.50	0.75-1.00	0.025	0.025	0.15-0.30	. . .	0.20-0.35	. . .	. . .
5115	0.13-0.18	0.70-0.90	0.025	0.025	0.15-0.30	. . .	0.70-0.90	. . .	. . .
5120	0.17–0.22	0.70–0.90	0.025	0.025	0.15-0.30	. . .	0.70–0.90	. . .	. . .
5130	0.28–0.33	0.70-0.90	0.025	0.025	0.15-0.30	. . .	0.80-1.10	. . .	. . .
5132	0.30–0.35	0.60-0.80	0.025	0.025	0.15-0.30	. . .	0.75-1.00	. . .	. . .
5140	0.38–0.43	0.70–0.90	0.025	0.025	0.15-0.30	. . .	0.70–0.90	. . .	. . .
5150	0.48–0.53	0.70–0.90	0.025	0.025	0.15-0.30	. . .	0.70–0.90	. . .	. . .
5160	0.56–0.64	0.75–1.00	0.025	0.025	0.15-0.30	. . .	0.70–0.90	. . .	. . .
E51100^C	0.95–1.10	0.25-0.45	0.025	0.025	0.15-0.30	. . .	0.90-1.15	. . .	. . .
E52100	0.98–1.10	0.25-0.45	0.025	0.025	0.15-0.30	. . .	1.30-1.60	. . .	. . .
6150	0.48–0.53	0.70-0.90	0.025	0.025	0.15-0.30	. . .	0.80-1.10	. . .	0.15 min
6158^C	0.55–0.62	0.70–1.10	0.025	0.025	0.15-0.30	. . .	0.90–1.20	. . .	0.10–0.20
8615	0.13–0.18	0.70–0.90	0.025	0.025	0.15-0.30	0.40–0.70	0.40–0.60	0.15–0.25	. . .
8617	0.15–0.20	0.70-0.90	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8620	0.18–0.23	0.70–0.90	0.035	0.035	0.15-0.30	0.40-0.70	0.40–0.60	0.15–.025	. . .
8630	0.28–0.33	0.70-0.90	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8640	0.38–0.43	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8642^C	0.40-0.45	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8645	0.43-0.48	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8650^C	0.48-0.53	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8655	0.501-0.59	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8660	0.55-0.65	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.15-0.25	. . .
8720	0.18-0.23	0.70-0.90	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.20-0.30	. . .
8735^C	0.33-0.38	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.20-0.30	. . .
8740^C	0.38-0.43	0.75-1.00	0.025	0.025	0.15-0.30	0.40-0.70	0.40-0.60	0.20-0.30	. . .
9260	0.56-0.64	0.75-1.00	0.025	0.025	1.80-2.20	. . .	. . .	. . .	. . .
9262^C	0.55-0.65	0.75-1.00	0.025	0.025	1.80-2.20	. .	0.25-0.40	. . .	. . .
E9310^C	0.08-0.13	0.45-0.65	0.025	0.025	0.20-0.35	3.30-35.0	1.00-1.40	0.08-0.15	. . .

^A The chemical ranges and limits shown are subject to product analysis tolerances. See Specification A505.

^B Other silicon ranges are available. Consult the producer.

^C Not an SAE Steel Designation.

2. Referenced Documents

A506-16(2021)	Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A6/A6M-23	Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A505-16(2021)	Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A635/A635M-22	Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A507-16(2021)	Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
A20/A20M-20	Standard Specification for General Requirements for Steel Plates for Pressure Vessels

Empfehlungen:

Aktualisierung der technischen Normen

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.

ASTM A1031/A1031M-12

Automatische name übersetzung:

Informationen über die Norm:

Kategorie - ähnliche Normen:

Die Annotation des Normtextes ASTM A1031/A1031M-12 :

Ergänzende Informationen

Ähnliche Normen:

Empfehlungen:

Aktualisierung der technischen Normen