Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM A123/A123M-13 1.11.2013 Ansicht

Ergänzende Informationen

ASTM A123/A123M-13

Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

Automatische name übersetzung:

Standard-Spezifikation für Zink (feuerverzinkt) Beschichtungen auf Eisen- und Stahlerzeugnisse

NORM herausgegeben am 1.11.2013

Sprache
Realisierung	PDF - sofortiges Download - 79.90 € Gedruckt - 79.90 €
Zugänglichkeit	AUF LAGER
Preis	79.90 € ohne MWS
79.90 €

Informationen über die Norm:

Bezeichnung normen: ASTM A123/A123M-13
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.11.2013
SKU: NS-1340
Zahl der Seiten: 8
Gewicht ca.: 24 g (0.05 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Die Annotation des Normtextes ASTM A123/A123M-13 :

Keywords:

coatings&mdash,zinc, galvanized coatings, steel products&mdash,metallic coated, zinc coatings&mdash,steel products, ICS Number Code 25.220.40 (Metallic coatings)

Ergänzende Informationen

1. Scope

1.1 This specification covers the requirements for zinc coating (galvanizing) by the hot-dip process on iron and steel products made from rolled pressed and forged shapes, castings, plates, bars, and strips.

1.2 This specification covers both unfabricated products and fabricated products, for example, assembled steel products, structural steel fabrications, large tubes already bent or welded before galvanizing, and wire work fabricated from uncoated steel wire. This specification also covers steel forgings and iron castings incorporated into pieces fabricated before galvanizing or which are too large to be centrifuged (or otherwise handled to remove excess galvanizing bath metal).

1.3 This specification does not apply to wire, pipe, tube, or steel sheet which is galvanized on specialized or continuous lines, or to steel less than 22 gage (0.0299 in.) [0.76 mm] thick.

1.4 The galvanizing of hardware items that are to be centrifuged or otherwise handled to remove excess zinc (such as bolts and similar threaded fasteners, castings and rolled, pressed and forged items) shall be in accordance with Specification A153/A153M.

1.5 Fabricated reinforcing steel bar assemblies are covered by the present specification. The galvanizing of separate reinforcing steel bars shall be in accordance with Specification A767/A767M.

1.6 This specification is applicable to orders in either inch-pound units (as A123) or SI units (as A123M). Inch-pound units and SI units are not necessarily exact equivalents. Within the text of this specification and where appropriate, SI units are shown in parentheses. Each system shall be used independently of the other without combining values in any way. In the case of orders in SI units, all testing and inspection shall be done using the metric equivalent of the test or inspection method as appropriate. In the case of orders in SI units, such shall be stated to the galvanizer when the order is placed.

2. Referenced Documents

B602-21	Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings
A90/A90M-21	Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
B960-18(2022)	Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
A143/A143M-07(2020)	Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
D6386-22	Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
B487-20	Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
B6-23	Standard Specification for Zinc
A902-23a	Standard Terminology Relating to Metallic Coated Steel Products (Includes all amendments and changes 11/29/2023).
A780-01	Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A385-08	Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A384/A384M-07(2019)	Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
E376-19	Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
A47/A47M-99(2022)e1	Standard Specification for Ferritic Malleable Iron Castings (Includes all amendments and changes 10/7/2022).
D7803-19	Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
A767/A767M-19	Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

Empfehlungen:

Aktualisierung der technischen Normen

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.

Hier können Sie Ihre Cookie-Einstellungen nach Ihren Wünschen anpassen.

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können.