Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM A193/A193M-10a 15.5.2010 Ansicht

Ergänzende Informationen

ASTM A193/A193M-10a

Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications (Includes all amendments And changes 6/3/2011).

Automatische name übersetzung:

Standard-Spezifikation für Alloy - Stahl und Edelstahl Verschraubung für hohe Temperaturen oder hoher Druck -Service und andere Special Purpose Applications

NORM herausgegeben am 15.5.2010

Sprache
Realisierung	PDF - sofortiges Download - 85.70 € Gedruckt - 85.70 €
Zugänglichkeit	AUF LAGER
Preis	85.70 € ohne MWS
85.70 €

Informationen über die Norm:

Bezeichnung normen: ASTM A193/A193M-10a
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 15.5.2010
SKU: NS-1505
Zahl der Seiten: 13
Gewicht ca.: 39 g (0.09 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Die Annotation des Normtextes ASTM A193/A193M-10a :

Keywords:

alloy steel bars, alloy steel bolting, fasteners, hardness, heat treatment , stainless steel bolting, Alloy steel bolting materials--specifications, High-temperature service applications--steel bolting applications, Stainless steel bolting materials--specifications, Stainless steel fittings--specifications, Steel fittings--specifications, Steel flanges--specifications, Steel valves--specifications, ICS Number Code 21.060.01 (Fasteners in general), 77.080.20 (Steels)

Ergänzende Informationen

1. Scope

1.1 This specification covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. See Specification for the definition of bolting. Bars and wire shall be hot-wrought and may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be carbide solution treated or carbide solution treated and strain-hardened. When strain hardened austenitic steel is ordered, the purchaser should take special care to ensure that Appendix X1 is thoroughly understood.

1.2 Several grades are covered, including ferritic steels and austenitic stainless steels designated B5, B8, and so forth. Selection will depend upon design, service conditions, mechanical properties, and high temperature characteristics.

1.3 The following referenced general requirements are indispensable for application of this specification: Specification .

Note 1—The committee formulating this specification has included fifteen steel types that have been rather extensively used for the present purpose. Other compositions will be considered for inclusion by the committee from time to time as the need becomes apparent.

Note 2—For grades of alloy-steel bolting suitable for use at the lower range of high temperature applications, reference should be made to Specification A354.

Note 3—For grades of alloy-steel bolting suitable for use in low temperature applications, reference should be made to Specification A320/A320M.

1.4 Nuts for use with bolting are covered in Section 14.

1.5 Supplementary Requirements are provided for use at the option of the purchaser. The supplementary requirements shall apply only when specified in the purchase order or contract.

1.6 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M specification designation (SI units), the inch-pound units shall apply.

1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

2. Referenced Documents

F1940-07a(2019)	Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners (Includes all amendments and changes 9/17/2019).
E566-19	Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals
B18.3.1M	Metric Socket Head Cap Screws
B18.3
B18.2.3.3M	Metric Heavy Hex Screws
B18.2.1
F2329-13	Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
E151-64 (1981)	Recommended Practice for Tension Tests of Metallic Materials at Elevated Temperatures With Rapid Heating and Conventional or Rapid Strain Rates (Withdrawn 1984)
E150-64 (1981)	Recommended Practice for Conducting Creep and Creep-Rupture Tension Tests of Metallic Materials Under Conditions of Rapid Heating and Short Times (Withdrawn 1984)
E139-11(2018)	Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
E21-20	Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
F1941-10	Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
AIAG B-5
A788/A788M-23	Standard Specification for Steel Forgings, General Requirements
A962/A962M-23a	Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range (Includes all amendments and changes 11/17/2023).
B633-23	Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B695-21	Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B696-00(2023)	Standard Specification for Coatings of Cadmium Mechanically Deposited
B766-23	Standard Specification for Electrodeposited Coatings of Cadmium
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E292-18	Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A194/A194M-23	Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A320/A320M-22a	Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service (Includes all amendments and changes 11/23/2022).
A354-17e2	Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners (Includes all amendments and changes 11/27/2018).
F606-14	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
E328-21	Standard Test Methods for Stress Relaxation for Materials and Structures
E709-21	Standard Guide for Magnetic Particle Testing

Empfehlungen:

Aktualisierung der technischen Normen

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.

Hier können Sie Ihre Cookie-Einstellungen nach Ihren Wünschen anpassen.

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können.