Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM A194/A194M-14 1.5.2014 Ansicht

Ergänzende Informationen

ASTM A194/A194M-14

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

Automatische name übersetzung:

Standard-Spezifikation für Carbon Alloy Steel Nuts für Bolts für Hochdruck oder hohen Temperaturen Dienst oder beide

NORM herausgegeben am 1.5.2014

Sprache
Realisierung	PDF - sofortiges Download - 87.30 € Gedruckt - 87.30 €
Zugänglichkeit	AUF LAGER
Preis	87.30 € ohne MWS
87.30 €

Informationen über die Norm:

Bezeichnung normen: ASTM A194/A194M-14
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.5.2014
SKU: NS-1538
Zahl der Seiten: 12
Gewicht ca.: 36 g (0.08 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Die Annotation des Normtextes ASTM A194/A194M-14 :

Keywords:

bolting, chemical analysis, coated, marking on fasteners, plated, ICS Number Code 21.060.20 (Nuts)

Ergänzende Informationen

1. Scope

1.1 This specification² covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range ¹/₄ through 4 in. and metric M6 through M100 nominal. It also covers austenitic stainless steel nuts in the size range ¹/₄ in. and M6 nominal and above. These nuts are intended for high-pressure or high-temperature service, or both. Grade substitutions without the purchaser's permission are not allowed.

1.2 Bars from which the nuts are made shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. When annealed and strain hardened austenitic stainless steel is ordered in accordance with Supplementary Requirement S1, the purchaser should take special care to ensure that 8.2.2, Supplementary Requirement S1, and 1.3 Supplementary requirements of an optional nature are provided. These shall apply only when specified in the inquiry, contract, and order.

1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable“ M” specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Within the text, the SI units are shown in brackets.

2. Referenced Documents

F2329/F2329M-15(2023)	Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
F1941/F1941M-16	Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
F1940-07a(2019)	Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners (Includes all amendments and changes 9/17/2019).
F606/F606M-21	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
A320/A320M-22a	Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service (Includes all amendments and changes 11/23/2022).
A276/A276M-24a	Standard Specification for Stainless Steel Bars and Shapes (Includes all amendments and changes 2/22/2024).
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A962/A962M-23a	Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range (Includes all amendments and changes 11/17/2023).
E566-19	Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
B766-23	Standard Specification for Electrodeposited Coatings of Cadmium
B696-00(2023)	Standard Specification for Coatings of Cadmium Mechanically Deposited
B695-21	Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B633-23	Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products

Empfehlungen:

Aktualisierung der Gesetze

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Vorschriften verwenden?
Wir bieten Ihnen Lösungen, damit Sie immer nur die gültigen (aktuellen) legislativen Vorschriften verwenden könnten.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.

Hier können Sie Ihre Cookie-Einstellungen nach Ihren Wünschen anpassen.

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können.