Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
Automatische name übersetzung:
Standard-Spezifikation für Weißblecherzeugnisse, Elektrolyt-verzinnt, kaltgewalzte Bleche
NORM herausgegeben am 1.3.2012
Bezeichnung normen: ASTM A599/A599M-07(2012)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.3.2012
SKU: NS-3282
Zahl der Seiten: 3
Gewicht ca.: 9 g (0.02 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
ICS Number Code 77.140.50 (Flat steel products and semi-products)
1. Scope | ||
1.1 This specification covers cold-rolled steel sheet in coils or in cut lengths, tin-coated by electrodeposition. The product is commonly known as electrolytic tin-coated sheet, and is for applications that need good solderability, good surface appearance, and a degree of corrosion resistance. Tin-coated sheet is produced to various designations of tin coating, as outlined in Designation No. |
Nominal Tin Coating |
Minimum Average Coating |
5 (0.6/0.6) |
0.025/0.025 (0.6/0.6) |
0.02/0.02 (0.5/0.5) |
10 (1.1/1.1) |
0.05/0.05 (1.1/1.1) |
0.04/0.04 (0.9/0.9) |
15 (1.7/1.7) |
0.075/0.075 (1.7/1.7) |
0.06/0.06 (1.4/1.4) |
20 (2.2/2.2) |
0.10/0.10 (2.2/2.2) |
0.08/0.08 (1.8/1.8) |
25 (2.8/2.8) |
0.125/0.125 (2.8/2.8) |
0.11/0.11 (2.5/2.5) |
50 (5.6/5.6) |
0.25/0.25 (5.6/5.6) |
0.23/0.23 (5.2/5.2) |
75 (8.4/8.4) |
0.375/0.375 (8.4/8.4) |
0.35/0.35 (7.8/7.8) |
100 (11.2/11.2) |
0.50/0.50 (11.2/11.2) |
0.45/0.45 (10.1/10.1) |
1.2 Limitations—This specification is applicable to orders in either inch-pound units (as A599), which is supplied in thicknesses from 0.015 in. to 0.036 in., or SI units [as A599M], which is supplied in thicknesses from 0.381 mm to 0.914 mm. For thicknesses lighter than 0.015 in. [0.381 mm], refer to A624/A624M [A624M].
1.3 Unless the order shows the “M” designation [SI units], the product shall be furnished to inch-pound units. The values stated in either inch-pound or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable (Includes all amendments and changes 12/29/2023). |
|
Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
|
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced |
|
Standard Specification for Tin Mill Products, General Requirements [Metric] |
|
Standard Specification for Tin Mill Products, General Requirements |
|
Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate (Includes all amendments and changes 3/6/2024). |
|
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for (Includes all amendments and changes 11/22/2019). |
Historisch
1.5.2014
Historisch
1.5.2014
Historisch
1.11.2009
Historisch
1.4.2013
Historisch
1.11.2010
Historisch
1.5.2014
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-12-23 (Zahl der Positionen: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.