Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
Automatische name übersetzung:
Standard-Spezifikation für Zinkguss Alloy-Barren für die Blechumformung Werkzeug- und Kunststoff-Spritzgussformen
NORM herausgegeben am 1.2.2013
Bezeichnung normen: ASTM B793-13
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.2.2013
SKU: NS-8149
Zahl der Seiten: 3
Gewicht ca.: 9 g (0.02 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
blanking dies, casting, casting alloys, forming dies, gravity casting, Kirksite, Kirksite A, Kirksite B, sheet metal dies, zinc, ICS Number Code 77.120.60 (Lead, zinc, tin and their alloys)
1. Scope | ||
1.1 This specification covers commercial zinc alloys in ingot form for remelting for the manufacture of dies and molds from the alloys as shown in
|
Composition, % |
|
UNS Z35543 |
UNS Z35542 |
|
Color CodeC |
Green/Red |
Green/Black |
Element |
|
|
Aluminum |
3.5–4.5 |
3.9–4.3 |
Cadmium |
0.005 max |
0.003 max |
Copper |
2.5–3.5 |
2.5–2.9 |
Iron |
0.100 max |
0.075 max |
Lead |
0.007 max |
0.003 max |
Magnesium |
0.02–0.10 |
0.02–0.05 |
Tin |
0.005 max |
0.001 max |
Zinc |
Remainder |
Remainder |
1.3 This specification covers two zinc alloys which are specified and designated as follows:
UNS |
ASTM |
Traditional |
|
|
|
Z35543 |
Alloy A |
Kirksite A |
Z35542 |
Alloy B |
Kirksite B |
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
ISO3815-1 |
Zinc and zinc alloysPart 1: Analysis of solid samples by optical emission spectrometry |
ISO3815-2 |
|
Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot |
|
Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition |
|
Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot |
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-21 (Zahl der Positionen: 2 206 478)
© Copyright 2024 NORMSERVIS s.r.o.