Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device (Withdrawn 2020)
Automatische name übersetzung:
Standard Praxis für die zerstörungsfreie Bewertung der Haftung der installierten Abdichtung und Versiegelung Gelenke Mit einer Rollvorrichtung
NORM herausgegeben am 1.7.2011
Bezeichnung normen: ASTM C1736-11
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.7.2011
SKU: NS-12338
Zahl der Seiten: 4
Gewicht ca.: 12 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
continuous sealant evaluation, cured, joint, non-destructive evaluation, rolling device, sealant failure in adhesion, ICS Number Code 91.100.50 (Binders. Sealing materials)
Significance and Use | ||||||
Many parameters contribute to the overall performance of a sealant application. Some of the most significant parameters are sealant joint geometry, joint movement, joint design, sealant movement capability, quality of workmanship, quality of adhesive bond, and quality of the sealant material. If a sealant fails in adhesion, there is no straightforward procedure for determining the cause. The adhesive failure may be due to workmanship, the specific surface preparation used, the specific sealant used, poor joint design, poor bond chemistry, or other causes. Comprehensive information for the use of joint sealants is provided in Guide C1193. This technique may not produce useful results when the sealant is in compression. Comprehensive information regarding the impact of temperature on sealant joint dimensions may be found in Guide C1472. |
||||||
1. Scope | ||||||
1.1 The non-destructive procedure described in this practice induces a depression (strain) in the sealant, creating an elongation of the sealant and a stress on the adhesive bond at the sealant to joint substrate interface. The primary purpose of the practice is to reveal sealant adhesion anomalies not discernible by visual examination, at the time of the evaluation, which may affect air infiltration resistance, or water infiltration resistance, or both, of the sealed joint. Note 1—The nondestructive procedure may require immediate repair of the sealant bead, if failure is identified. Appropriate materials and equipment should be available for this purpose. 1.2 This practice is useful for the evaluation of adhesion of weatherseals in joints that are backed with compressible materials such as backer rod. This practice is not as useful in joints with solid backing. 1.3 The proper use of this practice requires a working knowledge of the principles of sealants as applied in movement joint applications. 1.4 A sealant fails to perform as a weatherseal when it allows air, or water, or both, to infiltrate the joint. This practice does not evaluate the performance of an installed sealant as a weatherseal. This practice is intended to only evaluate the characteristics of the adhesive bond in a particular installation. Note 2—In addition to identifying adhesion characteristics of the sealant joint, this practice may provide the user with an indication of other characteristics and anomalies including, but not limited to, changes in sealant depth, insufficiently sized or configured backer rods, cohesive failures, entrapped air voids, and solid contaminants. Anomalies of this nature may be interpreted and addressed by the evaluator. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 The committee with jurisdiction for this standard is not aware of any comparable standard published by other organizations. 1.7 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historisch
1.1.2009
Historisch
1.1.2014
Historisch
1.7.2014
Historisch
1.1.2009
Historisch
1.6.2011
Historisch
1.5.2014
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-04 (Zahl der Positionen: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.