Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM C647-08(2013) 1.11.2013 Ansicht

Ergänzende Informationen

ASTM C647-08(2013)

Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

Automatische name übersetzung:

Standard-Leitfaden für die Eigenschaften und Tests von Kitte und Beschichtungs Finishes für Wärmedämmung

NORM herausgegeben am 1.11.2013

Sprache
Realisierung	PDF - sofortiges Download - 76.10 € Gedruckt - 76.10 €
Zugänglichkeit	AUF LAGER
Preis	76.10 € ohne MWS
76.10 €

Informationen über die Norm:

Bezeichnung normen: ASTM C647-08(2013)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.11.2013
SKU: NS-14405
Zahl der Seiten: 6
Gewicht ca.: 18 g (0.04 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Kategorie - ähnliche Normen:

Thermal and sound insulating materials

Die Annotation des Normtextes ASTM C647-08(2013) :

Keywords:

application properties, mastic coating, service properties, ICS Number Code 91.100.60 (Thermal and sound insulating materials)

Ergänzende Informationen

Significance and Use

4.1 Each of the properties listed should be considered in selecting materials for specific projects. A list of the selected properties with limiting values assigned will form a part of the product specification.

4.2 All of the properties may not be pertinent in any specific situation, and all of the tests outlined may not be required. A condition to any specification must be an evaluation of the proposed use to determine which properties may be required.

4.3 Membrane reinforcements are frequently specified and used with mastics and coatings. Service properties of such systems of finishes may be different from the unreinforced finishes; therefore, it is essential to test specimens of the reinforced system.

1. Scope

1.1 This guide identifies properties of mastics and coating finishes characterizing their performance as finishes for thermal insulation.

1.2 These properties relate to application and service. Each property is defined, and its significance and suggested test methods are described.

1.3 The properties appear in the following order in this guide.

Paragraph

Application Properties

Consistency

6.1

Coverage

6.2

Build

6.3

Wet Flammability

6.4

Toxicity

6.5

Temperature and Humidity Range

6.6

Surface Wetting and Adhesion

6.7

Gap Filling and Bridging

6.8

Sizing and Sealing

6.9

Corrosion or Solvent Attack

6.10

Drying Time and Curing Time

6.11

Shrinkage

6.12

Storage Stability

6.13

Freeze-Thaw Stability

6.14

Service Properties

Specimen Preparation

7.1

Outdoor Durability

7.2

Environmental Resistance

7.3

Temperature Limits

7.3.1

Chemicals and Water Resistance

7.3.2

Mold and Mildew Resistance

7.3.3

Surface Flammability

7.4

Water-Vapor Transmission Rate

7.5

Adhesion

7.6

Damage Resistance

7.7

Impact Resistance

7.7.1

Abrasion Resistance

7.7.2

Stress Resistance

7.8

Flexure

7.8.1

Elongation

7.8.2

Color

7.9

Odor

7.10

Other Properties

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

2. Referenced Documents

E659-15(2023)	Standard Test Method for Autoignition Temperature of Chemicals
G21-15(2021)e1	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi (Includes all amendments and changes 6/22/2021).
G23-96	Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000)
D638-22	Standard Test Method for Tensile Properties of Plastics
D658-91	Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)
D747-10	Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019)
D790-17	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D822-D822M-13	Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D3828-16a(2021)	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester (Includes all amendments and changes 7/26/2021).
D4339-01(2018)	Standard Test Method for Determination of the Odor of Adhesives
C419-20	Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C461-23	Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
C488-16(2023)	Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C639-15(2020)	Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C681-14(2019)	Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C733-93	Standard Test Method for Volume Shrinkage of Latex Sealants (Withdrawn 2000)
C755-20	Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
C168-22	Standard Terminology Relating to Thermal Insulation
C792-23	Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
D2243-20	Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2354-10(2023)	Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
D1849-95(2019)	Standard Test Method for Package Stability of Paint
D2444-21	Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2453-15(2020)e1	Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds (Includes all amendments and changes 5/28/2020).
D2485-22	Standard Test Methods for Evaluating Coatings For High Temperature Service
D2507-93(2001)	Standard Terminology of Rheological Properties of Gelled Rocket Propellants (Withdrawn 2003)
D2939-03	Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)
D3134-15(2019)	Standard Practice for Establishing Color and Gloss Tolerances
D3274-09(2021)	Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
D3361/D3361M-22	Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D2196-20	Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
D903-98(2017)	Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
D968-22	Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D1310-14(2021)	Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D1640-03	Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
D1654-08(2016)e1	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments (Includes all amendments and changes 5/3/2017).
D1729-22	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1823-16	Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824-16	Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D92-18	Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D93-20	Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D36/D36M-14(2020)	Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D56-22	Standard Test Method for Flash Point by Tag Closed Cup Tester
D529-04	Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials (Withdrawn 2013)
D543-21	Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D562-10(2023)	Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
E96/E96M-23	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
E162-22	Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

Empfehlungen:

Aktualisierung der technischen Normen

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.