Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
Automatische name übersetzung:
Standard-Prüfverfahren für Simulierter Service-Prüfung von Holz und Holzwerkfertigbodenbelag
NORM herausgegeben am 1.3.2011
Bezeichnung normen: ASTM D2394-05(2011)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.3.2011
SKU: NS-20224
Zahl der Seiten: 11
Gewicht ca.: 33 g (0.07 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
flooring, wood, wood-base, wood-base finish flooring, Wood products (flooring), Coefficient of friction (COF)--floor surfaces, Flooring/floor covering systems (wood), Impact testing--building products, Indentation, Loading tests--building constructions/materials, Simulated service test, Surface analysis--building construction materials/insulation, Wetting, ICS Number Code 79.020 (Wood technology processes), 79.080 (Semi-manufactures of timber)
Significance and Use | ||||
The test methods presented herein are intended to provide both a factual and comparative means of appraising the suitability of finish flooring. The procedures developed simulate some conditions of use that may require either maintenance beyond that considered normal or replacement of the floor surface material. It is important for some of the evaluations that the substrate to be used beneath the finish flooring be duplicated because the type and degree of support will have a direct influence on the value obtained from test. For example, in some present-day construction, low-density materials are used for sound-deadening immediately below the finish flooring. The way this substrate distributes loading and absorbs energy will have an influence on evaluations such as those in rolling and concentrated loads. The test methods presented herein may be used to compare different finish floorings as to their resistance to severe and ordinary service loads and also may serve as the means to set specification limits. The properties obtained by these test methods are needed in addition to such basic material properties as stiffness, strength, hardness, and dimensional stability. Not all test may be required for any specific investigation. There may be an interrelation between two tests, and when it has been demonstrated what the interrelation is, a complete evaluation will only be required as a final stage of a study. In each instance, therefore, it will be necessary to determine which evaluations should be made to fulfill the objectives. |
||||
1. Scope | ||||
1.1 These test methods cover procedures for measuring the performance of finish flooring under the following service loadings and conditions: |
||||
2. Referenced Documents | ||||
|
Historisch
1.8.2014
Historisch
1.12.2010
Historisch
15.11.2011
Historisch
1.4.2013
Historisch
1.8.2010
Historisch
1.11.2011
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-09-15 (Zahl der Positionen: 2 433 670)
© Copyright 2024 NORMSERVIS s.r.o.