Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
Automatische name übersetzung:
Standard-Spezifikation für chlorierte Poly (Vinylchlorid) (PVC-C) Kunststoff Warm- und Kaltwasserverteilungssysteme
NORM herausgegeben am 1.11.2014
Bezeichnung normen: ASTM D2846/D2846M-14
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.11.2014
SKU: NS-21694
Zahl der Seiten: 12
Gewicht ca.: 36 g (0.08 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
cold-water pipe, CPVC piping, hot-water pipe, water distribution piping ,, ICS Number Code 23.040.20 (Plastic pipes)
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||
1.1 This specification covers requirements, test methods, and methods of marking for chlorinated poly(vinyl chloride) plastic hot- and cold-water distribution system components made in one standard dimension ratio and intended for water service up to and including 180°F (82°C). These components comprise pipe and tubing, socket-type fittings, street fittings, plastic-to-metal transition fittings, solvent cements, and adhesives. Requirements and methods of test are included for materials, workmanship, dimensions and tolerances, hydrostatic sustained pressure strength, and thermocycling resistance. The components covered by this specification are intended for use in residential and commercial, hot and cold, potable water distribution systems. 1.2 The products covered by this specification are intended for use with the distribution of pressurized liquids only, which are chemically compatible with the piping materials. Due to inherent hazards associated with testing components and systems with compressed air or other compressed gases some manufacturers do not allow pneumatic testing of their products. Consult with specific product/component manufacturers for their specific testing procedures prior to pneumatic testing. Note 1: Pressurized (compressed) air or other compressed gases
contain large amounts of stored energy which present serious saftey
hazards should a system fail for any reason.
1.3 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Note 2: Suggested hydrostatic design stresses and hydrostatic
pressure ratings for pipe, tubing, and fittings are listed in
Appendix X1. Design,
assembly, and installation considerations are discussed in
Appendix X2. An optional
performance qualification and an in-plant quality control program
are recommended in Appendix
X3.
1.5 The following safety hazards caveat pertains
only to the test method portion, Sections 9 and 10, of this specification:
Standard Specification for Metal
Mechanical Cold Flare Compression Fittings with Disc Spring for
Crosslinked Polyethylene (PEX) Tubing (Withdrawn 2018) Standard Test Method for Resistance to
Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and
Fittings Standard Test Method for Time-to-Failure
of Plastic Pipe Under Constant Internal Pressure Standard Specification for Plastic Insert
Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene
of Raised Temperature (PE-RT) Tubing MIL-STD-129 Marking for Shipment and Storage Fed. Std. No. 123 Marking for Shipments (Civil Agencies)
Available from Standardization Documents Order Desk, DODSSP, Bldg.
4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098,
http://www.dodssp.daps.mil. Standard No. 61 for Drinking Water Systems
Components--Health Effects Standard No. 14 for Plastic Piping Components and Related
Materials Available from NSF International, P.O. Box 130140, 789 N.
Dixboro Rd., Ann Arbor, MI 48113-0140, http://www.nsf.org. Standard Specification for Metal Insert
Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked
Polyethylene (PEX) Tubing and SDR9 Cross-linked
Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX)
Tubing Standard Specification for Plastic Insert
Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless
Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and
SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing (Includes
all amendments and changes 3/13/2023). Standard Specification for Stainless
Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX)
Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal
Insert and Plastic Insert Fittings Standard Specification for Cold-Expansion
Fittings with Metal Compression-Sleeves for Crosslinked
Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature
(PE-RT) Pipe Standard Specification for Metal Insert
Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless
Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and
SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing Standard Classification System and Basis
for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds
and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Practice for Determination of
the Impact Resistance of Thermoplastic Pipe and Fittings by Means
of a Tup (Falling Weight) Standard Test Method for Obtaining
Hydrostatic Design Basis for Thermoplastic Pipe Materials or
Pressure Design Basis for Thermoplastic Pipe Products Standard Practice for Safe Handling of
Solvent Cements, Primers, and Cleaners Used for Joining
Thermoplastic Pipe and Fittings Standard Terminology Relating to Plastic
Piping Systems Standard Specification for Solvent
Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe
and Fittings Standard Specification for Taper Pipe
Threads 60° for Thermoplastic Pipe and Fittings Standard Specification for Cold Expansion
Fittings with PEX Reinforcing Rings for Use with Cross-linked
Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT)
Tubing (Includes all amendments and changes 9/11/2023). ANSI Z17.1-1958 Preferred Numbers Available from American
National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New
York, NY 10036, http://www.ansi.org. |
Historisch
1.9.2011
Historisch
1.2.2011
Historisch
1.8.2014
Historisch
1.11.2014
Historisch
1.3.2014
Historisch
1.12.2011
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-09-04 (Zahl der Positionen: 2 346 114)
© Copyright 2024 NORMSERVIS s.r.o.