Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
Automatische name übersetzung:
Standard Test Methode zur Messung der Mindestsauerstoffkonzentration zur Unterstützung Candle-Like Verbrennung von Kunststoffen (Oxygen Index)
NORM herausgegeben am 1.9.2013
Bezeichnung normen: ASTM D2863-13
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.9.2013
SKU: NS-21756
Zahl der Seiten: 14
Gewicht ca.: 42 g (0.09 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
candle-like combustion, minimum oxygen concentration, oxygen, oxygen concentration, oxygen index, ICS Number Code 83.080.01 (Plastics in general)
Significance and Use | ||||||||||||||||||
5.1 This test method provides for the measuring of the minimum concentration of oxygen in a flowing mixture of oxygen and nitrogen that will just support flaming combustion of plastics. Correlation with burning characteristics under actual use conditions is not implied. 5.2 In this test method, the specimens are subjected to one or more specific sets of laboratory test conditions. If different test conditions are substituted or the end-use conditions are changed, it is not always possible by or from this test to predict changes in the fire-test-response characteristics measured. Therefore, the results are valid only for the fire-test-exposure conditions described in this test method. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 This fire-test-response standard describes a procedure for measuring the minimum concentration of oxygen, expressed as percent volume, that will just support flaming combustion in a flowing mixture of oxygen and nitrogen. 1.2 This test method provides three testing procedures. Procedure A involves top surface ignition, Procedure B involves propagating ignition, and Procedure C is a short procedure involving the comparison with a specified minimum value of the oxygen index. 1.3 Test specimens used for this test method are prepared into one of six types of specimens (see 1.4 This test method provides for testing materials that are structurally self-supporting in the form of vertical bars or sheet up to 10.5-mm thick. Such materials are solid, laminated or cellular materials characterized by an apparent density greater than 15 kg/m3. 1.5 This test method also provides for testing flexible sheet or film materials, while supported vertically. 1.6 This test method is also suitable, in some cases, for cellular materials having an apparent density of less than 15 kg/m3. 1.7 This test method measures and
describes the response of materials, products, or assemblies to
heat and flame under controlled conditions, but does not by itself
incorporate all factors required for fire hazard or fire risk
assessment of the materials, products, or assemblies under actual
fire conditions.
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.10 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
|
|
Standard Practice for Conditioning Plastics for Testing
|
|
Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
|
|
Standard Test Method for Apparent Density of Rigid Cellular Plastics
|
ISO 13943
|
Fire Safety--Vocabulary
|
ISO 7823-1
|
Poly(Methylmethacrylate) Sheets--Types, Dimensions and Characteristics--Part 1--Cast Sheets
|
ISO 4589-2
|
Plastics--Determination of Flammability by Oxygen Index--Part 2, Ambient Temperatures
|
|
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
|
|
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
|
|
Standard Terminology of Fire Standards |
Historisch
1.6.2013
Historisch
15.7.2013
Historisch
1.7.2010
Historisch
15.11.2009
Historisch
1.2.2014
Historisch
1.9.2013
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-04 (Zahl der Positionen: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.