Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Methods for Moisture in Activated Carbon
Automatische name übersetzung:
Standard-Prüfverfahren für Feuchtigkeit in der Aktivkohle
NORM herausgegeben am 1.7.2014
Bezeichnung normen: ASTM D2867-09(2014)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.7.2014
SKU: NS-21772
Zahl der Seiten: 4
Gewicht ca.: 12 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
activated carbon, moisture, ICS Number Code 71.040.30 (Chemical reagents)
Significance and Use | ||||
4.1 The moisture content of activated carbon is often required to define and express its properties in relation to the net weight of the carbon. 4.2 The moisture content of activated carbon packed in typical shipping containers will usually increase during transportation and storage. Users of activated carbon in applications where low moisture content is important should be aware of this effect. |
||||
1. Scope | ||||
1.1 These test methods provide three procedures for the determination of the moisture content of activated carbon. The procedures may also be used to dry samples required for other tests. The oven-drying and moisture balance methods are used when water is the only volatile material present and is in significant quantities, and the activated carbon is not heat-sensitive (some activated carbons can ignite spontaneously at temperatures as low as 150°C). The xylene-extraction method is used when a carbon is known or suspected to be heat sensitive or to contain nonwater-miscible organic compounds instead of or in addition to water. The oven-drying method described in these test methods may be used as the reference for development of instrumental techniques for moisture determination in activated carbon. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historisch
1.3.2013
Historisch
1.4.2010
Historisch
1.3.2011
Historisch
1.3.2013
Historisch
1.4.2010
Historisch
1.8.2011
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-26 (Zahl der Positionen: 2 206 223)
© Copyright 2024 NORMSERVIS s.r.o.