Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Salts in Crude Oil (Electrometric Method)
Automatische name übersetzung:
Standard Test Method for Salze in Crude Oil (elektrometrische Methode)
NORM herausgegeben am 1.5.2013
Bezeichnung normen: ASTM D3230-13
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.5.2013
SKU: NS-22935
Zahl der Seiten: 7
Gewicht ca.: 21 g (0.05 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
chlorides, crude oil, electrometric, halides, petroleum, salt in crude, ICS Number Code 75.040 (Crude petroleum)
Significance and Use | ||||||||
5.1 This test method is used to determine the approximate chloride content of crude oils, a knowledge of which is important in deciding whether or not the crude oil needs desalting. The efficiency of the process desalter can also be evaluated. 5.2 Excessive chloride left in the crude oil frequently results in higher corrosion rates in refining units and also has detrimental effects on catalysts used in these units. 5.3 This test method provides a rapid and convenient means of determining the approximate content of chlorides in crude oil and is useful to crude oil processors. |
||||||||
1. Scope | ||||||||
1.1 This test method covers the determination of the approximate chloride (salts) concentration in crude oil. The range of concentration covered is 0 to 500 mg/kg or 0 to 150 lb/1000 bbl as chloride concentration/volume of crude oil. 1.2 This test method measures conductivity in the crude oil due to the presence of common chlorides, such as sodium, calcium, and magnesium. Other conductive materials may also be present in the crude oil. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1 Exception—Acceptable concentration units are g/m3 or PTB (lb/1000 bbl). 1.4 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Test Method for Gum Content in
Fuels by Jet Evaporation Standard Test Method for Water in Crude
Oils by Coulometric Karl Fischer Titration Standard Test Method for Density,
Relative Density, and API Gravity of Crude Oils by Digital Density
Analyzer Standard Specification for Reagent
Water |
Historisch
1.11.2012
Historisch
1.6.2011
Historisch
1.7.2010
Historisch
1.6.2011
Historisch
1.5.2011
Historisch
1.11.2012
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-04 (Zahl der Positionen: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.