Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Vanadium in Water
Automatische name übersetzung:
Standardtestverfahren für Vanadium in Wasser
NORM herausgegeben am 1.9.2012
Bezeichnung normen: ASTM D3373-12
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.9.2012
SKU: NS-23456
Zahl der Seiten: 5
Gewicht ca.: 15 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
atomic absorption, furnace, total recoverable vanadium, water, ICS Number Code 13.060.50 (Examination of water for chemical substances)
Significance and Use | ||||||||||||||||||
5.1 Vanadium can be found in waste that result from chemical cleaning of components in which the metal is alloyed. 5.2 National Pollutant Discharge Elimination Systems permits or other standards, or both, require monitoring pollutants in waste discharged onto the water shed of, or into, navigable waters, and those disposed of in such a manner that eventual contamination of underground water could result. 5.3 This test method affords an accurate and sensitive means of determining compliance or noncompliance, or both, with those permits. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 This test method covers the determination of dissolved and total recoverable vanadium in most waters and wastewater by graphite furnace atomic absorption spectrophotometry. 1.2 The optimum range of this test method is 10 to 200 μg/L of vanadium based on a 20-μL sample size. Concentrations higher than 200μ g/L may be determined by proper dilution of sample. A detection level as low as 4 μg/L of vanadium has been reported. 1.3 This test method has been used successfully with reagent water, lake water, tap water, river water, condensate from a medium Btu coal gasification process, and well water. It is the user's responsibility to ensure the validity of this test method for waters of untested matrices. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability or regulatory limitations prior to use. 1.6 Former Test Method A (Catalytic) was discontinued. Refer to Appendix X1 for historical information. |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Historisch
1.5.2011
Historisch
1.6.2012
Historisch
1.2.2009
Historisch
1.9.2012
Historisch
15.5.2009
Historisch
15.5.2009
Bereitstellung von aktuellen Informationen über legislative Vorschriften in der Sammlung der Gesetze bis zum Jahr 1945.
Aktualisierung 2x pro Monat!
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-04 (Zahl der Positionen: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.