Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
Automatische name übersetzung:
Standard Test Methode zur Bestimmung der Wasser- Trenneigenschaften der Luftfahrtturbinenkraftstoffendurch tragbare Separometer
NORM herausgegeben am 15.6.2013
Bezeichnung normen: ASTM D3948-13
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 15.6.2013
SKU: NS-25436
Zahl der Seiten: 12
Gewicht ca.: 36 g (0.08 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
aviation turbine fuel, coalescence, jet fuel coalescer, MSEP rating, surfactant, water separation, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | |
5.1 This test method provides a measure of the presence of surfactants in aviation turbine fuels. Like Test Methods D2550 and D3602, this test method can detect carryover traces of refinery treating residues in fuel as produced. They can also detect surface active substances added to or picked up by the fuel during handling from point of production to point of use. Certain additives can also have an adverse effect on the rating. Some of these substances affect the ability of filter separators to separate free water from the fuel. 5.2 The Micro-Separometer has a measurement range from 50 to 100. Values obtained outside of those limits are undefined and invalid. In the event a value greater than 100 is obtained, there is a good probability that light transmittance was reduced by material contained in the fuel used to set the 100 reference level. The material was subsequently removed during the coalescing portion of the test, thus, the processed fuel had a higher light transmittance than the fuel sample used to obtain the 100 reference level resulting in the final rating measuring in excess of 100. 5.3 Test Mode A function of the separometer will give approximately the same rating for Jet A, Jet A-1, MIL JP-5, MIL JP-7, and MIL JP-8 fuels as Test Methods D2550 and D3602. Using Mode A water separation characteristic ratings of Jet B and MIL JP-4 fuels will not necessarily be equivalent to Test Method D2550 but will give approximately the same rating as Test Method D3602. All Micro-Separometers have Test Mode A capability. 5.4 The Test Mode B option is used to determine water separation ratings for MIL JP-4 fuels containing fuel system corrosion and icing inhibitors. These ratings are approximately the same as those obtained using Test Method D2550. 5.5 Selection of Mode A or Mode B depends on the specific fuel and specification requirement. Available Test Mode(s) |
|
Fuel |
Applicable Test Mode |
Jet A |
A |
Jet A-1 |
A |
Jet B |
A |
MIL JP-5 |
A |
MIL JP-7 |
A |
MIL JP-8 |
A |
MIL JP-4 |
B |
5.6 The basic difference between Modes A and B is the flow rate at which the water/fuel emulsion is forced through the standard fiberglass coalescer cell. The lapsed time required to force the emulsion through the coalescer cell in Mode A is 45 ± 2 s, whereas, Mode B requires 25 ± 1 s.
1.1 This test method covers a rapid portable means for field and laboratory use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.
1.2 The procedure section of this test method contains two different modes of test equipment operation. The primary difference between the modes of operation is the rate of fuel flow through the fiberglass coalescing material. Test method selection is dependent on the particular fuel to be tested.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer |
|
Method of Test for Water Separation Characteristics of Aviation Turbine Fuels (Withdrawn 1989) |
|
Standard Specification for Aviation Turbine Fuels (Includes all amendments and changes 10/11/2023). |
|
MIL-T-83133 |
Turbine Fuel, Aviation, Kerosene Types, NATO F34 (JP-8), NATO F-35, and JP-8+100 |
MIL-T-38219 |
Turbine Fuel, Low Volatility, JP-7 |
Test Method for Water Separation Characteristics of Aviation Turbine Fuels (Withdrawn 1994) |
|
Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
|
Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer |
|
MIL-T-5624 |
Turbine Fuel, Aviation Grades JP-4, JP-5, and JP-5/JP-8 ST |
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-12-22 (Zahl der Positionen: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.