Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
Name übersetzen
NORM herausgegeben am 1.4.2018
Bezeichnung normen: ASTM D6110-18
Ausgabedatum normen: 1.4.2018
SKU: NS-847257
Zahl der Seiten: 17
Gewicht ca.: 51 g (0.11 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
Charpy impact, impact resistance, notch sensitivity, notched specimen,, ICS Number Code 83.140.01 (Rubber and plastic products in general)
Significance and Use | ||||||||||||||
5.1 Before proceeding with this test method, refer to the material specification for the material being tested. Any test specimen preparation, conditioning, dimensions and testing parameters required by the materials specification shall take precedence over those required by this test method. Table 1 of Classification D4000 lists the ASTM materials standards that currently exist. If there is no material specification, then the requirements of this test method apply. 5.2 The pendulum impact test indicates the energy to break standard test specimens of specified size under stipulated conditions of specimen mounting, notching (stress concentration), and pendulum velocity at impact. 5.3 For this test method, the energy lost by the pendulum during the breakage of the specimen is the sum of the energies required to initiate fracture of the specimen; to propagate the fracture across the specimen; to throw the free ends of the broken specimen (toss energy); to bend the specimen; to produce vibration in the pendulum arm; to produce vibration or horizontal movement of the machine frame or base; to overcome friction in the pendulum bearing and in the indicating mechanism, and to overcome windage (pendulum air drag); to indent or deform, plastically, the specimen at the line of impact; and to overcome the friction caused by the rubbing of the striking nose over the face of the bent specimen. Note 5: The toss energy, or the energy used to throw the free
ends of the broken specimen, is suspected to represent a very large
fraction of the total energy absorbed when testing relatively dense
and brittle materials. No procedure has been established for
estimating the toss energy for the Charpy method.
5.4 For tough, ductile, fiber-filled, or cloth-laminated materials, the fracture propagation energy is usually large compared to the fracture initiation energy. When testing these materials, energy losses due to fracture propagation, vibration, friction between the striking nose and the specimen has the potential to become quite significant, even when the specimen is accurately machined and positioned, and the machine is in good condition with adequate capacity (see Note 6). Significant energy losses due to bending and indentation when testing soft materials have also been observed. Note 6: Although the frame and the base of the machine must be
sufficiently rigid and massive to handle the energies of tough
specimens without motion or excessive vibration, the pendulum arm
cannot be made very massive because the greater part of its mass
must be concentrated near its center of percussion at its striking
nose. Locating the striking nose precisely at the center of
percussion reduces the vibration of the pendulum arm when used with
brittle specimens. Some losses due to pendulum arm vibration (the
amount varying with the design of the pendulum) will occur with
tough specimens even when the striking nose is properly
positioned.
5.5 In a well-designed machine of sufficient rigidity and mass, the losses due to vibration and friction in the pendulum bearing and in the indicating mechanism will be very small. Vibrational losses are observed when wide specimens of tough materials are tested in machines of insufficient mass, or in machines that are not securely fastened to a heavy base. 5.6 Since this test method permits a variation in the width of the specimens and since the width dictates, for many materials, whether a brittle, low-energy break (as evidenced by little or no drawing down or necking and by a relatively low energy absorption) or a ductile, high-energy break (as evidenced by considerable drawing or necking down in the region behind the notch and by a relatively high energy absorption) will occur, it is necessary that the width be stated in the specification covering that material and that the width be stated along with the impact value. 5.7 This test method requires that the specimen break completely. Results obtained when testing materials with a pendulum that does not have sufficient energy to complete the breaking of the extreme fibers and toss the broken pieces shall be considered a departure from standard and shall not be reported as a standard result. Impact values cannot be directly compared for any two materials that experience different types of failure. 5.8 The value of this impact test method lies mainly in the areas of quality control and materials specification. If two groups of specimens of supposedly the same material show significantly different energy absorptions, critical widths, or critical temperatures, it is permitted to assume that they were made of different materials or were exposed to different processing or conditioning environments. The fact that a material shows twice the energy absorption of another under these conditions of test does not indicate that this same relationship will exist under another set of test conditions. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 This test method is used to determine the resistance of plastics to breakage by flexural shock as indicated by the energy extracted from standardized (see Note 1) pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. This test method requires specimens to be made with a milled notch (see Note 2). The notch produces a stress concentration which promotes a brittle, rather than a ductile, fracture. The results of this test method are reported in terms of energy absorbed per unit of specimen width (see Note 3). Note 1: The machines with pendulum-type hammers have been
standardized in that they must comply with certain requirements
including a fixed height of hammer fall, which results in a
substantially fixed velocity of the hammer at the moment of impact.
Hammers of different initial energies (produced by varying their
effective weights), however, are recommended for use with specimens
of different impact resistance. Moreover, manufacturers of the
equipment are permitted to use different lengths and constructions
of pendulums with possible differences in pendulum rigidities
resulting (see Section 5). Be
aware that other differences in machine design do exist.
Note 2: The specimens are standardized in that they have a
fixed length and fixed depth, however, the width of the specimens
is permitted to vary between limits. One design of milled notch is
allowed. The notch in the specimen serves to concentrate the
stress, minimize plastic deformation, and direct the fracture to
the part of the specimen behind the notch. Scatter in
energy-to-break is thus reduced. Because of differences in the
elastic and viscoelastic properties of plastics, however, response
to a given notch varies among materials.
Note 3: Caution must be exercised in interpreting the results
of this test method. The following testing parameters have been
shown to affect test results significantly: method of specimen
fabrication, including but not limited to processing technology,
molding conditions, mold design, and thermal treatment; method of
notching; speed of notching tool; design of notching apparatus;
quality of the notch; time between notching and test; test specimen
thickness; test specimen width under notch; and environmental
conditioning.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 4: This standard resembles ISO 179 in title only. The
content is significantly different.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-01 (Zahl der Positionen: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.