Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM D6823-08(2013) 1.7.2013 Ansicht

Ergänzende Informationen

ASTM D6823-08(2013)

Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

Automatische name übersetzung:

Standard-Spezifikation für Gewerbe Boiler Fuels Mit gebrauchten Schmierölen

NORM herausgegeben am 1.7.2013

Sprache
Realisierung	PDF - sofortiges Download - 79.90 € Gedruckt - 79.90 €
Zugänglichkeit	AUF LAGER
Preis	79.90 € ohne MWS
79.90 €

Informationen über die Norm:

Bezeichnung normen: ASTM D6823-08(2013)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.7.2013
SKU: NS-36670
Zahl der Seiten: 7
Gewicht ca.: 21 g (0.05 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Kategorie - ähnliche Normen:

Lubricants, industrial oils and related products

Die Annotation des Normtextes ASTM D6823-08(2013) :

Keywords:

burner fuels, fuel oils, petroleum and petroleum products, specifications, used oils, ICS Number Code 75.100 (Lubricants, industrial oils and related products)

Ergänzende Informationen

1. Scope

1.1 This specification covers four grades of fuel oil made of at least 25 % used lubricating oils. The four grades of fuel are intended for use in various types of fuel-oil-burning industrial equipment and commercial boilers under various climatic and operating conditions. These fuels are not intended for use in residential heaters.

1.1.1 Grades RFC4, RFC5L, RFC5H and RFC6 are used lubricating oil blends of increasing viscosity, with or without middle distillate or residual fuel oil, or both, that are intended for use in industrial burners and commercial boilers equipped to handle these types of fuels. This specification is for applications where Specification D6448 would not meet the performance or other requirements of the burner or boiler in question.

1.2 This specification is for use in contracts for the purchase of fuel oils derived from used lubricating oil and for the guidance of consumers of such fuels. This specification does not address the frequency with which any particular test must be run.

1.3 Nothing in this specification shall preclude observance of national or local regulations which can be more restrictive. In some jurisdictions, used oil is considered a hazardous waste and fuels derived from used oil are required to meet certain criteria before use as a fuel.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4.1 Exception—Table 1 and Table X1.1 include inch-pound values in parentheses for information only.

2. Referenced Documents

D1266-18	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
D1298-12b(2017)e1	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Includes all amendments and changes 3/14/2023).
D1552-23	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
D1796-22	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
D2622-21	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D473-22	Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
D482-19	Standard Test Method for Ash from Petroleum Products
D2983-23	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
D56-22	Standard Test Method for Flash Point by Tag Closed Cup Tester
D93-20	Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D95-23	Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
D97-17b(2022)	Standard Test Method for Pour Point of Petroleum Products (Includes all amendments and changes 11/29/2022).
D129-18	Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
D240-19	Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
D396-21	Standard Specification for Fuel Oils
D445-23	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D3228-22	Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
D3245-03	Standard Test Method for Pumpability of Industrial Fuel Oils (Withdrawn 2010)
D3828-16a(2021)	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester (Includes all amendments and changes 7/26/2021).
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4057-22	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D4175-23a	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants (Includes all amendments and changes 12/21/2023).
D4177-22e1	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products (Includes all amendments and changes 3/24/2023).
D4294-21	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
D4629-17	Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
40 CFR Part 279	Standards for the Management of Used Oil
D5854-19a	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products (Includes all amendments and changes 8/13/2019).
D6160-21	Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
D6448-16(2022)	Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
D6450-16a(2021)	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester (Includes all amendments and changes 7/27/2021).
D7042-21a	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) (Includes all amendments and changes 12/14/2021).
40 CFR Part 761	Polychlorinated Biphenyls (PCBs) Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions
D5384-14(2019)	Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
D4868-17	Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
D5185-18	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5291-21	Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
D4865-23	Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
D664-18e2	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration (Includes all amendments and changes 1/4/2019).
D974-22	Standard Test Method for Acid and Base Number by Color-Indicator Titration

ASTM D6823-08(2013)

Automatische name übersetzung:

Informationen über die Norm:

Kategorie - ähnliche Normen:

Die Annotation des Normtextes ASTM D6823-08(2013) :

Ergänzende Informationen

Ähnliche Normen: