Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
Automatische name übersetzung:
Standard-Leitfaden für KernoberflächenFeuchte- und DichtemessgerätKalibrieranlage Setup-
NORM herausgegeben am 1.12.2004
Bezeichnung normen: ASTM D7013-04
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.12.2004
SKU: NS-37295
Zahl der Seiten: 6
Gewicht ca.: 18 g (0.04 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
Gauge, nuclear gauge, calibration, calibration block, calibration reference block, ICS Number Code 27.120.10 (Reactor engineering)
Significance and Use | ||||||||
Gauge calibration is conducted for the following purposes: 5.1.1 To ensure gauge measurement repeatability between gauges 5.1.2 To correct for electronic and mechanical changes over time 5.1.3 To adjust readings after major service to the gauge To establish a proper calibration area for gauges To reduce the chance of improper calibration Note 1—The quality of the results produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of practice D 3740 are generally considered capable of competent and objective testing/inspection/etc. Users of this standard are cautioned that compliance with practice D 3740 does not in itself assure a means of evaluating some of those factors. |
||||||||
1. Scope | ||||||||
1.1 This guide outlines procedures for setup of nuclear moisture density gauge in shielded, Method A, and unshielded, Method B, configurations. 1.2 This guide does not attempt to describe the calibration techniques or methods. It is assumed that this guide will be used by persons familiar with the operations of the gauge and in performing proper calibration, service and maintenance. 1.3 This guide does not attempt to address maintenance or service procedures related to the gauge. This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this guide to establish appropriate safety, and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a projects many unique aspects. The word "Standard" in the title of this document has been approved through ASTM consensus process. 1.5 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in practice D 6026. 1.5.1 The method used to specify how data are collected, calculated, or recorded in this standard is not directly related to the accuracy to which the data can be applied in the design or other uses, or both. How one applies the results obtained using this standard is beyond its scope. |
||||||||
2. Referenced Documents | ||||||||
|
Bereitstellung von aktuellen Informationen über legislative Vorschriften in der Sammlung der Gesetze bis zum Jahr 1945.
Aktualisierung 2x pro Monat!
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-01 (Zahl der Positionen: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.