Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
Automatische name übersetzung:
Standard Test Method for Shear Stability of Polymer enthaltenden Flüssigkeiten unter Verwendung eines europäischen Dieselinjektor Apparat bei 30 und 90 Zyklen
NORM herausgegeben am 1.11.2012
Bezeichnung normen: ASTM D7109-12
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.11.2012
SKU: NS-37575
Zahl der Seiten: 8
Gewicht ca.: 24 g (0.05 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
diesel injector apparatus, mechanical shear stability, polymer containing fluid, viscosity loss, ICS Number Code 17.060 (Measurement of volume, mass, density, viscosity)
Significance and Use | ||||||||||||
5.1 This test method evaluates the percent viscosity loss of fluids resulting from physical degradation in the high shear nozzle device. Thermal or oxidative effects are minimized. 5.2 This test method may be used for quality control purposes by manufacturers of polymeric lubricant additives and their customers. 5.3 This test method is not intended to predict viscosity loss in field service in different field equipment under widely varying operating conditions, which may cause lubricant viscosity to change due to thermal and oxidative changes, as well as by the mechanical shearing of polymer. However, when the field service conditions, primarily or exclusively, result in the degradation of polymer by mechanical shearing, there may be a correlation between the results from this test method and results from the field. |
||||||||||||
1. Scope | ||||||||||||
1.1 This test method covers the evaluation of the shear stability of polymer-containing fluids. The test method measures the viscosity loss, in mm2/s and percent, at 100°C of polymer-containing fluids when evaluated by a diesel injector apparatus procedure that uses European diesel injector test equipment. The viscosity loss reflects polymer degradation due to shear at the nozzle. Viscosity loss is evaluated after both 30 and 90 cycles of shearing. 1.2 The values stated in SI units
are to be regarded as standard. The values given in parentheses are
for information only.
1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Practice for Applying
Statistical Quality Assurance and Control Charting Techniques to
Evaluate Analytical Measurement System Performance (Includes all
amendments and changes 12/12/2023). CEC L-14-A-93 Evaluation of the Mechanical Shear
Stability of Lubricating Oils Containing Polymers Available from
CEC Secretariat, Interlynk Administrative Services, Ltd., Lynk
House, 17 Peckleton Lane, Desford, Leicestershire, LE9 9JU, United
Kingdom. Standard Test Method for Kinematic
Viscosity of Transparent and Opaque Liquids (and Calculation of
Dynamic Viscosity) Standard Test Method for Sonic Shear
Stability of Polymer-Containing Oils Standard Test Method for Fuel Injector
Shear Stability Test (FISST) for Polymer Containing Fluids Standard Test Method for Shear Stability
of Polymer Containing Fluids Using a European Diesel Injector
Apparatus (Includes all amendments and changes 6/16/2020). |
Historisch
1.12.2010
Historisch
1.11.2012
Historisch
1.11.2012
Historisch
1.11.2012
Historisch
1.2.2013
Historisch
1.10.2010
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-22 (Zahl der Positionen: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.