Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry
Automatische name übersetzung:
Standard Test Methode zur Bestimmung der chemischen Spezies in Marine Fuel Oil von Multidimensional Gaschromatographie & ndash; Massenspektrometrie
NORM herausgegeben am 1.4.2013
Bezeichnung normen: ASTM D7845-13
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.4.2013
SKU: NS-39181
Zahl der Seiten: 11
Gewicht ca.: 33 g (0.07 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
bunker fuel oil, gas chromatography, GC/MS, marine fuel oil, mass spectrometry, ICS Number Code 47.020.20 (Marine engines and propulsion systems), 75.160.20 (Liquid fuels)
Significance and Use | |
5.1 The test method allows the quantitation of chemical species at low levels in marine fuel oils and cutter stocks. A great many types and concentrations of chemical species are found in marine fuel oils. A root cause relationship between the presence of such species or their concentration in fuels and any failure modes allegedly induced by the use of these fuels has not been established. This method is necessary to establish test conditions required for future ISO 8217:2010 Petroleum products- Fuels (class F)-Specifications of marine fuel oils as defined in section 5.5 and Annex B item (d). Additional compounds may be determined by using the same conditions and by selecting required mass spectral selected ions, accordingly. |
|
1. Scope | |
1.1 This test method covers the quantitative determination of a variety of chemical species in marine fuel oil (bunker fuel oil) by gas chromatography – mass spectrometry. By using the same conditions and by selecting required mass spectral selected ions, the test method may be used for the determination of other species than those for which precision statements and limits of detection have been established. 1.2 An example list of chemical species for which a limit of quantification has been determined by means of this test method is given in Table 1.
|
Limit of Quantitation |
n-butyl alcohol |
10 |
Cyclohexanol |
10 |
n-butyl ether |
10 |
n-butyl acylate |
10 |
Styrene |
10 |
alpha-pinene |
10 |
Phenol |
20 |
alpha-methyl styrene |
10 |
beta-pinene |
10 |
4-methyl styrene |
10 |
trans-B-methyl styrene |
10 |
3-methyl styrene |
10 |
2-methyl styrene |
10 |
Dicyclopentadiene |
10 |
Limonene |
10 |
Indene |
20 |
1-phenyl ethanol |
20 |
para, alpha-Dimethyl styrene |
20 |
2,5 dimethyl styrene |
20 |
2,4 dimethyl styrene |
20 |
2-phenyl ethanol (phenylethanol) |
20 |
2-Ethyl Phenol |
50 |
2,4 Dimethyl Phenol |
20 |
4-Ethyl Phenol (co elutes with 3-ethylphenol) |
20 |
2-Phenoxy-1-propanol |
50 |
2-Phenoxy ethanol |
50 |
4-isopropylphenol |
50 |
1-Phenoxy-2-Propanol |
20 |
Styrene Glycol |
50 |
1.3 Other refinery hydrocarbon fractions and their mixtures may be tested using the same test method conditions. However, the precision of this test method reflects the compounds in 1.4 Results are reported to the nearest 1.0 mg/kg.
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards |
|
Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance (Includes all amendments and changes 12/12/2023). |
|
ISO 8217:2010 |
Petroleum ProductsFuels (Class F)Specifications of Marine Fuels Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org. |
Historisch
1.10.2012
Historisch
1.10.2013
Historisch
1.5.2010
Historisch
1.5.2013
Historisch
1.10.2013
Historisch
1.10.2009
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-22 (Zahl der Positionen: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.