Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Guide for Risk-Based Corrective Action
Name übersetzen
NORM herausgegeben am 1.4.2022
Bezeichnung normen: ASTM E2081-22
Ausgabedatum normen: 1.4.2022
SKU: NS-1058373
Zahl der Seiten: 98
Gewicht ca.: 325 g (0.72 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
ICS Number Code 71.020 (Production in the chemical industry)
Significance and Use | ||||||||||||||||||||||||||||||||
4.1?The risk-based corrective action (RBCA) process presented in this guide is a consistent, streamlined decision process for selecting corrective actions at chemical release sites. 4.2?Risk assessment is a developing science. The scientific approach used to develop the RBSL and SSTL may vary by regulatory agency and by user due to regulatory requirements, guidance and use of alternative scientifically-based methods. 4.3?Activities described in this guide should be conducted by persons familiar with current site characterization techniques, remedial action science and technology, current human health risk and exposure assessment methodologies, toxicology, and current ecological evaluation methodologies. 4.4?In order to properly apply the RBCA process, the user should 4.4.1?Prescribing Tier 1 RBSL or RESC as remedial action standards for all sites rather than screening levels, 4.4.2?Limiting use of the RBCA process to Tier 1 evaluation only and not continuing with Tier 2 or Tier 3 analyses for sites where further tier evaluation is appropriate, 4.4.3?Placing arbitrary time constraints on the corrective action process; for example, requiring that Tiers 1, 2, and 3 be completed within time periods that do not reflect the actual urgency of and risks posed by the site, 4.4.4?Using the RBCA process only when active remedial action is not technically feasible, rather than as a process that is applicable during all phases of corrective action, 4.4.5?Conducting active remedial action to achieve only technology-based remedial limits (for example, asymptotic levels) prior to determining applicable corrective action goals, 4.4.6?Using predictive modeling that is not supported by available data or knowledge of site conditions, 4.4.7?Limiting remedial action options to a single class of remedial actions for all sites (for example Guide E1943), 4.4.8?Using unjustified or inappropriate exposure factors, 4.4.9?Using unjustified or inappropriate toxicity parameters, 4.4.10?Failing to consider cumulative risks and additive effects when evaluating multiple chemicals, 4.4.11?Excluding the evaluation of options for activity and use limitations, point(s) of exposure, point(s) of demonstration, sequencing remedial action activities at multiple sites on the same facility, or risk levels, 4.4.12?Excluding the maintenance and monitoring of activity and use limitations, 4.4.13?Failing to consider the long-term effectiveness and reliability of potential remedial action options, 4.4.14?Failing to evaluate potential risks to the public, to workers and to relevant ecological receptors and habitats that may be created by proposed remedial actions or assessment methods and 4.4.15?Continuing monitoring or remedial action at sites that have achieved the corrective action goals (unless monitoring is specifically required for an activity and use limitation or another regulatory requirement). Achievement of corrective action goals is predicated on sufficient monitoring to substantiate the site conditions. 4.5?The RBCA process described in this guide includes several features that are only examples of standardized approaches to addressing the objectives of the particular activity, for example, the response action evaluation table and the exposure scenario evaluation flowchart. These elements should be customized by the user based on the constraints of the site or group of sites being addressed and the appropriate technical policy decisions. The objectives of the analyses are identified in this guide. |
||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||
1.1?This is a guide for conducting risk-based corrective action (RBCA) at chemical release sites based on protecting human health and the environment. The RBCA is a consistent decision-making process for the assessment and response to chemical releases. Chemical release sites vary greatly in terms of complexity, physical and chemical characteristics, and in the risk that they may pose to human health and the environment. The RBCA process recognizes this diversity by using a tiered approach that integrates site assessment and response actions with human health and ecological risk assessment to determine the need for remedial action and to tailor corrective action activities to site-specific conditions and risks. The evaluations and methods used in the RBCA process begin with simple analyses in Tier 1 and move to more complex evaluations in either Tier 2 or Tier 3, as applicable. The process of gathering and evaluating data is conducted in a scaled fashion. Consequently, only the data that are necessary for a particular tier's decision-making are collected at that tier. 1.2?This guide describes an approach for risk-based corrective action. It is intended to help direct and streamline the corrective action process and to complement but not to supersede federal, state and local regulations. It can be employed at sites where corrective action is being conducted including sites where there may not be a regulatory framework for corrective action, or where the user wishes to conduct corrective action such as sites in voluntary cleanup programs or under Brownfields initiatives. In addition, it can also be used as a unifying framework when several different agency programs affect the site. Furthermore, the user should be aware of the federal, state and local corrective action programs that are applicable for the site and, regardless of the program, federal, state and local agency approvals may be required to implement the processes outlined in this guide. Finally, regardless of whether a corrective action is specifically governed by a regulatory program, the user should consult the regulatory agency requirements to identify the appropriate technical policy decisions prior to implementing the RBCA process. 1.3?There are numerous technical policy decisions that must be made to implement the RBCA process, for example, defining data quality objectives, determining target risk levels, specifying the appropriate statistics and sample sizes for calculating exposure concentrations, selection of exposure assumptions, determining when and how to account for cumulative risks and additive effects among chemical(s) of concern and addressing resource protection. It is not the intent of this guide to define appropriate technical policy decisions. The user must identify the appropriate technical policy decisions. 1.4?The general performance standard for this guide requires that: 1.4.1?Technical policy decisions be identified before beginning the process, 1.4.2?Data and information collected during the RBCA process, including historical data as well as new data collected during the site assessment, will be relevant to and of sufficient quantity and quality to answer the questions posed by and the decisions to be made in the RBCA process, 1.4.3?Actions taken during the risk-based decision process will be protective of human health and the environment, 1.4.4?Applicable federal, state and local regulations will be followed (for example, waste management requirements, ground water designations, worker protection) and, 1.4.5?Remedial actions implemented will not result in higher risk levels than existed before taking actions. 1.5?ASTM standards are not federal or state regulations, they are consensus standards that can voluntarily be followed. 1.6?The RBCA process is not limited to a particular class of compounds. This guide is intended to be a companion to Guide E1739, and does not supersede that document for petroleum releases. If a release site contains a mixture of releases of petroleum and other chemicals, this guide should be followed. 1.7?The United States Environmental Protection Agency (USEPA) has developed guidance for human health risk evaluation (see Appendix X9 for other resources). Many of the components of this guidance have been integrated into the RBCA framework. The science of ecological evaluation and the process by which the science is applied, however, are not as well defined and agreed upon as human health risk assessment. Therefore, the information provided in this guide for each tier evaluation for relevant ecological receptors and habitats is general. The user is referred to Appendix X5, which provides additional information regarding the development of a RBCA framework for protection of ecological resources. 1.8?The decision process described in this guide integrates exposure and risk assessment practices with site assessment activities and remedial action selection to ensure that the chosen actions are protective of human health and the environment. The following general sequence of events is prescribed in RBCA: 1.8.1?Perform an initial site assessment and develop the first iteration of the site conceptual model (see Guides E1689 and E3240 and ISO 21365:2019). If the information is sufficient to demonstrate that there are no complete or potentially complete exposure pathways, then no further action is warranted, 1.8.2?Evaluate the site (see definition of site 3.2.50) for response actions (multiple sites at a single facility may require different response actions and times), 1.8.3?Implement a response action that is appropriate for conditions found at the site during the site response action evaluation, 1.8.4?Define data requirements, develop data quality objectives, and perform a site assessment for the Tier 1 evaluation if the site conceptual model indicates that the tiered evaluation is appropriate, 1.8.5?Conduct an exposure pathway analysis to determine if relevant ecological receptors and habitats are present and if complete and potentially complete exposure pathways are present. If no relevant ecological receptors or habitats or complete and potentially complete exposure pathways exist, then no further action for relevant ecological receptors and habitats is warranted, 1.8.6?For potential human exposure pathways, identify the applicable Risk Based Screening Levels (RBSL) and for potential ecological exposure pathways, identify the applicable Relevant Ecological Screening Criteria (RESC). In addition, identify any Other Relevant Measurable Criteria (ORMC), as applicable. Collectively these are the Tier 1 corrective action goals for the site; 1.8.7?Compare site conditions to the Tier 1 corrective action goals determined to be applicable to the site; 1.8.8?If site conditions meet the corrective action goals for chemical(s) of concern then, no further action is warranted, 1.8.9?If site conditions do not meet corrective action goals for chemical(s) of concern then, one or more of the following actions is appropriate: 1.8.9.1?Further tier evaluation; 1.8.9.2?Implement interim remedial action; 1.8.9.3?Design and implement remedial action to achieve the corrective action goals. 1.8.10?Define Tier 2 data requirements, data quality objectives, collect additional site-specific information and update the site conceptual model, as necessary, if further tier evaluation is warranted, 1.8.11?Develop point(s) of demonstration and Tier 2 corrective action goals based on Site-Specific Target Levels (SSTL), Site-Specific Ecological Criteria (SSEC) or ORMC, where appropriate, for complete and potentially complete exposure pathways, including exposure pathways for which no RBSL, RESC or ORMC, as applicable, were determined; 1.8.12?Compare site conditions to the Tier 2 corrective action goals determined to be applicable to the site; 1.8.13?If site conditions meet corrective action goals for chemical(s) of concern, then no further action is warranted, 1.8.14?If site conditions do not meet corrective action goals for chemical(s) of concern then, one or more of the following actions is appropriate: 1.8.14.1?Further tier evaluation; 1.8.14.2?Implement interim remedial action; 1.8.14.3?Design and implement remedial action to achieve the corrective action goals. 1.8.15?Define Tier 3 data requirements, data quality objectives and collect additional site-specific information and update the site conceptual model, as necessary, if further tier evaluation is warranted, 1.8.16?Develop point(s) of demonstration and Tier 3 corrective action goals based on SSTL, SSEC, or ORMC, where appropriate; 1.8.17?Compare site conditions to the Tier 3 corrective action goals, 1.8.18?If site conditions meet corrective action goals for chemical(s) of concern, then no further action is warranted, 1.8.19?If site conditions do not meet corrective action goals for chemical(s) of concern, then one of the following actions is appropriate: 1.8.19.1?Implement interim remedial action to facilitate reassessment of the tier evaluation; 1.8.19.2?Design and implement remedial action to achieve the corrective action goals. 1.8.20?Develop and implement a monitoring plan based on the corrective action goals to validate the assumptions used for the tier evaluation and to demonstrate effectiveness of the remedial action, as applicable. 1.9?For chemical release sites currently in corrective action, the user should review information and data available for the site and determine the most appropriate entry point into the RBCA framework consistent with the general performance standards and sequence of events outlined in this guide. 1.10?This Guide is Organized as FollowsSection 2 lists referenced documents, Section 3 defines terminology used in this guide, Section 4 describes the significance and use of this guide, Section 5 is a summary of the tiered approach, and Section 6 presents the RBCA procedures in a step-by-step process. Appendix X1 provides guidance on developing technical policy decisions and building a RBCA program, Appendix X2 provides examples of chemical properties and effects data that may be useful for a RBCA evaluation, Appendix X3 provides EXAMPLE development of RBSL, Appendix X4 describes the use of predictive modeling, Appendix X5 provides an outline of the process of the ecological evaluation, Appendix X6 provides information about activity and use limitations, Appendix X7 includes illustrative examples of the application of the RBCA framework, Appendix X8 addresses Per- and polyfluoroalkyl substances (PFAS). PFAS are synthetic chemicals that do not occur naturally in the environment. There are many different types of PFAS such as perfluorocarboxylic acids (for example, PFOA, sometimes called C8, and PFNA) and perfluorosulfonates (for example, PFOS and PFHxS), and Appendix X9 includes references that may be helpful to the user. Note 1:?Appendix X8
references the Washington Department of Ecologys risk-based
corrective action approach to PFAS as an example; numerous other
states including Alaska, California, Colorado, Maine,
Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New
York, Pennsylvania, Rhode Island, and Vermont have robust programs
to address releases of PFAS to the environment.
The appendixes are provided for additional information and are NOT
included as mandatory sections of this guide.1.11?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.12?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||
|
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-11-24 (Zahl der Positionen: 2 206 712)
© Copyright 2024 NORMSERVIS s.r.o.