Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM F3122-14 1.11.2014 Ansicht

Ergänzende Informationen

ASTM F3122-14

Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes

Automatische name übersetzung:

Standard-Leitfaden zur Bewertung von mechanischen Eigenschaften von metallischen Werkstoffen mittels Additive Manufacturing Processes

NORM herausgegeben am 1.11.2014

Sprache
Realisierung	PDF - sofortiges Download - 76.70 € Gedruckt - 76.70 €
Zugänglichkeit	AUF LAGER
Preis	76.70 € ohne MWS
76.70 €

Informationen über die Norm:

Bezeichnung normen: ASTM F3122-14
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.11.2014
SKU: NS-54956
Zahl der Seiten: 6
Gewicht ca.: 18 g (0.04 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Kategorie - ähnliche Normen:

Mechanical testing of metals

Die Annotation des Normtextes ASTM F3122-14 :

Keywords:

anisotropic, Barcol, bearing pin, bearing strength, bearing test, bend testing, Brinell hardness, Charpy, Chevron-shaped-notch, chord modulus, compression testing, crack-arrest fracture toughness, crack formation, crack growth, crack-tip opening displacement, CTOD, dynamic elastic properties, Elastic modulus, fatigue life, fatigue testing, force-controlled, fracture toughness, hardness, hardness conversion, impact testing, inelastic, Izod, Knoop hardness, linear elastic, nonlinear elastic

Ergänzende Informationen

1. Scope

1.1 This standard serves as a guide to existing standards or variations of existing standards that may be applicable to determine specific mechanical properties of materials made with an additive manufacturing process.

1.2 As noted in many of these referenced standards, there are several factors that may influence the reported properties, including material, material anisotropy, method of material preparation, porosity, method of specimen preparation, testing environment, specimen alignment and gripping, testing speed, and testing temperature. These factors should be recorded, to the extent that they are known, according to Practice F2971 and the guidelines of the referenced standards.

1.3 The following standards are not referred to directly in the guide but also have information that may be useful in the testing of metal test specimens made via additive manufacturing: A370, A1058, B211, B348, B557, B565, B724, B769, E3, E6, E7, E290, E467, E468, E837, E915, E1049,E1823, E1942.

1.4 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
E9-19	Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E10-23	Standard Test Method for Brinell Hardness of Metallic Materials
E3-11(2017)	Standard Guide for Preparation of Metallographic Specimens
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E21-20	Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E23-23a	Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Includes all amendments and changes 4/13/2023).
E837-20	Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
E915-21	Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement
E1049-85(2023)	Standard Practices for Cycle Counting in Fatigue Analysis
E1221-23	Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
E1290-08	Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
E1304-97(2020)	Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
E1450-16	Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1457-23	Standard Test Method for Measurement of Creep Crack Growth Times in Metals
E1681-23	Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
E1820-23b	Standard Test Method for Measurement of Fracture Toughness (Includes all amendments and changes 7/14/2023).
E1823-23	Standard Terminology Relating to Fatigue and Fracture Testing
E1875-20a	Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance (Includes all amendments and changes 3/23/2021).
E1876-22	Standard Test Method for Dynamic Young´s Modulus, Shear Modulus, and Poisson´s Ratio by Impulse Excitation of Vibration
E1942-98(2018)e1	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing (Includes all amendments and changes 8/14/2018).
E2368-10(2017)	Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
E2472-12(2018)e2	Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions (Includes all amendments and changes 6/12/2023).
E2714-13(2020)	Standard Test Method for Creep-Fatigue Testing
E2760-19e1	Standard Test Method for Creep-Fatigue Crack Growth Testing (Includes all amendments and changes 7/29/2020).
E2789-10(2021)	Standard Guide for Fretting Fatigue Testing
F2971-13(2021)	Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
F2792-12	Standard Terminology for Additive Manufacturing Technologies^,
ISO/ASTM 52921	Terminology for Additive Manufacturing--Coordinate Systems and Test Methodologies
E466-21	Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E467-21	Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
E468-18	Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
E606-04	Standard Practice for Strain-Controlled Fatigue Testing
E647-23a	Standard Test Method for Measurement of Fatigue Crack Growth Rates (Includes all amendments and changes 6/27/2023).
E740-03	Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
E448-82(1997)e2	Standard Practice for Scleroscope Hardness Testing of Metallic Materials
E132-17	Standard Test Method for Poisson´s Ratio at Room Temperature
E140-12B(2019)e1	Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019).
E143-20	Standard Test Method for Shear Modulus at Room Temperature
E209-18	Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
E238-17a	Standard Test Method for Pin-Type Bearing Test of Metallic Materials (Includes all amendments and changes 4/25/2017).
E290-22	Standard Test Methods for Bend Testing of Material for Ductility
E292-18	Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
E111-17	Standard Test Method for Young´s Modulus, Tangent Modulus, and Chord Modulus
E384-22	Standard Test Method for Microindentation Hardness of Materials
E399-23	Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
B645-21	Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
B646-19	Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B565-20	Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B647-23	Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648-23	Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B724-00	Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
B769-11(2021)	Standard Test Method for Shear Testing of Aluminum Alloys
B909-21a	Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products (Includes all amendments and changes 12/22/2021).
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A1058-19	Standard Test Methods for Mechanical Testing of Steel Products´Metric
B211-12	Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B348-13	Standard Specification for Titanium and Titanium Alloy Bars and Billets
B557-15(2023)	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
E6-23a	Standard Terminology Relating to Methods of Mechanical Testing (Includes all amendments and changes 3/29/2023).
E7-22	Standard Terminology Relating to Metallography

Empfehlungen:

EEviZak – alle Gesetze einschließlich ihrer Evidenz in einer Stelle

Bereitstellung von aktuellen Informationen über legislative Vorschriften in der Sammlung der Gesetze bis zum Jahr 1945.
Aktualisierung 2x pro Monat!

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.