Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements (Includes all amendments And changes 12/31/2010).
Automatische name übersetzung:
Standard Praxis für polarisiertes Licht Fehlererkennung in Aerospace Transparency Heizelemente
NORM herausgegeben am 1.10.2003
Bezeichnung normen: ASTM F319-91a(2003)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.10.2003
SKU: NS-54972
Zahl der Seiten: 3
Gewicht ca.: 9 g (0.02 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
coatings, conductive coatings, heating elements, polarized light, polarized light inspection, ICS Number Code 49.060 (Aerospace electric equipment and systems)
Significance and Use |
This practice is useful as a screening basis for acceptance or rejection of transparencies during manufacturing so that units with identifiable flaws will not be carried to final inspection for rejection at that time. This practice may also be employed as a go-no go technique for acceptance or rejection of the finished product. This practice is simple, inexpensive, and effective. Flaws identified by this practice, as with other optical methods, are limited to those which produce temperature gradients when electrically powered. Any other type of flaw, such as minor scratches parallel to the direction of electrical flow, are not detectable. If another method (equally suitable for flaw detection) is designated for final optical inspection of the laminated part under power, the polarized light practice will not be required for the final inspection. |
1. Scope |
1.1 This practice covers a standard procedure for detecting flaws in the conductive coating (heater element) by the observation of polarized light patterns. 1.2 This practice applies to coatings on surfaces of monolithic transparencies as well as to coatings imbedded in laminated structures. 1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Section 6. |
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-08-30 (Zahl der Positionen: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.