ASTM F412-12

F714-24

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

F771-99

Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems

F876-24

Standard Specification for Crosslinked Polyethylene (PEX) Tubing

F877-24

Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

F891-23

Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

F948-94(2001)

Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow

F1025-19

Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

F1281-24

Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

F1335-04

Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011)

F1473-23

Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

F1488-14(2019)

Standard Specification for Coextruded Composite Pipe

F1499-22

Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

D3139-19

Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

D3261-24

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

D3309-96a

Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems

D3350-21

Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

F402-18

Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

F405-13

Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings (Withdrawn 2015)

F441/F441M-23

Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

F442/F442M-23

Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

F1970-23

Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

F1973-21

Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

C114-23

Standard Test Methods for Chemical Analysis of Hydraulic Cement

D256-23e1

Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Includes all amendments and changes 4/7/2023).

D747-10

Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019)

D790-17

Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D882-18

Standard Test Method for Tensile Properties of Thin Plastic Sheeting

D638-22

Standard Test Method for Tensile Properties of Plastics

D648-18

Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

D2683-20

Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

D2737-22

Standard Specification for Polyethylene (PE) Plastic Tubing

D2447-03

Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)

D2751-05

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014)

D2837-22

Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

D2846/D2846M-19a

Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems (Includes all amendments and changes 4/29/2019).

D3035-22

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

D2239-22

Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

D2241-20

Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

D2282-99

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)

D2444-21

Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

D1003-21

Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

D883-24

Standard Terminology Relating to Plastics

D907-15(2023)

Standard Terminology of Adhesives

D1079-20

Standard Terminology Relating to Roofing and Waterproofing

D1238-23a

Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer (Includes all amendments and changes 12/6/2023).

D1488-00(2018)

Standard Test Method for Amylaceous Matter in Adhesives

D1505-18

Standard Test Method for Density of Plastics by the Density-Gradient Technique

D1527-99

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

D1785-21a

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 (Includes all amendments and changes 10/8/2021).

D2104-03

Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)

F1986-01

Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

F1987-01

Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems

F1668-16(2022)

Standard Guide for Construction Procedures for Buried Plastic Pipe

F1733-24

Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing

F1760-16(2020)

Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

F1924-19

Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

F1948-20

Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

D2513-20

Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

D2661-21

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

D2666-96a

Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005)

D2680-20

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

F2145-23

Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing

F2158-08(2016)

Standard Specification for Residential Central-Vacuum Tube and Fittings

F2160-22a

Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) (Includes all amendments and changes 9/15/2022).

F2176-17

Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct

F2623-24e1

Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications (Includes all amendments and changes 3/8/2024).

F2769-24

Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

F2788/F2788M-21

Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe

F2818-10(2023)

Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

F2829/F2829M-21

Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe

F2905/F2905M-22

Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications

F2929-17(2021)

Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig

F2968/F2968M-21

Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications

F449-20

Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

F628-23

Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

F645-18b

Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems (Includes all amendments and changes 1/3/2019).