Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
NORM herausgegeben am 1.4.2021
Warum Redline?
Redline stellt eine schnelle und einfache Art dar, wie man gesamte Änderungen zwischen einer aktuellen gültigen Norm und der Vorversion vergleichen kann.
Dank Redline werden Sie sofort informiert von:
Sparen Sie Ihre Zeit und Sorgen!
Dank Redline brauchen Sie nicht mehr zu forschen, was in der neuen Norm geändert wurde! Redline spart Ihre Zeit und stellt sicher, dass Sie über Änderungen in der Norm erfahren.
Der Preis
Wenn Sie die Variante "Gültige Norm + Redline" auswählen, bekommen Sie beide Dokumente! Und das Beste ist, dass der Preis der Gültigen Norm + Redline nur ein wenig höher ist, als der Preis der gültigen Norm selbst.
Bezeichnung normen: ASTM B438-21
Ausgabedatum normen: 1.4.2021
Zahl der Seiten: 26
Gewicht ca.: 78 g (0.17 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
This specification covers sintered bronze, oil-impregnated bearings made primarily from elemental copper, tin, lead, and graphite powders. This specification covers the following variables: Grades (available in three bronze base compositions identifiable by different graphite contents and one leaded bronze grade) and Type (Grades 1 and 2 are available in four types described by specific density ranges. Grade 3 is available in two types and Grade 4 is available in one type). Sintered bronze bearings shall be made by molding or briquetting metal powder mixtures to the proper density. The material shall conform to the required chemical composition for copper, tin, graphite, iron, lead, zinc, nickel, and antimony. The density of bearings supplied impregnated with lubricant shall be within the prescribed limits. Oil content of bearings shall not be less than the prescribed value for each grade and type of material. The material of different grades and types shall conform to the prescribed radial crushing strength requirements. An acceptance specification for the minimum bearing breaking load may be established for any specific standard oil-impregnated bearing. Chemical analysis shall be made for each representative sample of chips, which may be obtained by milling, drilling, filing, or crushing a bearing with clean dry tools without lubrication.
Keywords:
bearing breaking load, bronze bearings, impregnated density, interconnected porosity, oil content, oil-impregnated bearings, open porosity, PM bearings, porous metallic bearings, PV Factor, PV Limit, radial crushing strength, self-lubricating bearings,, ICS Number Code 21.100.01 (Bearings in general)