Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
NORM herausgegeben am 1.5.2022
Warum Redline?
Redline stellt eine schnelle und einfache Art dar, wie man gesamte Änderungen zwischen einer aktuellen gültigen Norm und der Vorversion vergleichen kann.
Dank Redline werden Sie sofort informiert von:
Sparen Sie Ihre Zeit und Sorgen!
Dank Redline brauchen Sie nicht mehr zu forschen, was in der neuen Norm geändert wurde! Redline spart Ihre Zeit und stellt sicher, dass Sie über Änderungen in der Norm erfahren.
Der Preis
Wenn Sie die Variante "Gültige Norm + Redline" auswählen, bekommen Sie beide Dokumente! Und das Beste ist, dass der Preis der Gültigen Norm + Redline nur ein wenig höher ist, als der Preis der gültigen Norm selbst.
Designation standards: ASTM B733-22
Publication date standards: 1.5.2022
The number of pages: 17
Approximate weight : 51 g (0.11 lbs)
Country: American technical standard
Kategorie: Technische Normen ASTM
This specification establishes the requirements for autocatalytic (electroless) nickel-phosphorus coatings applied from acidic aqueous solutions to metallic products for use in engineering functions operating at elevated temperatures. The coatings covered here are alloys of nickel and phosphorus produced by self-sustaining autocatalytic chemical reduction with hypophosphite. The coatings are grouped into the following classification systems: types, which are based on the general composition with respect to phosphorus; service condition numbers, which are based on the severity of exposure to which the coating is intended to perform and the corresponding minimum thickness that will provide satisfactory performance; and post heat treatment class, which are based on post-plating heat treatment temperature and time to produce the desired adhesion and hardness improvements. Prior to plating, substrates should be pretreated by stress relief for reducing risks of hydrogen embrittlement, peening, and racking. The coatings shall be sampled and tested accordingly to evaluate both acceptance (appearance, thickness, adhesion, and porosity) and qualification requirements (composition, microhardness, and hydrogen embrittlement). Thickness shall be assessed either by microscopical method, a magnetic induction instrument, beta backscatter method, a micrometer, weigh-plate-weigh method, coulometric method, or X-ray spectrometry. Adhesion shall be examined either by bend, impact, or thermal shock tests. And porosity shall be inspected either by ferroxyl test, boiling water test, aerated water test, or alizarin test.
Keywords:
autocatalytic, chemical nickel, coatings, conductive, corrosion resistance, electroless, functional, nickel, nickel phosphorus, wear resistance,, ICS Number Code 25.220.40 (Metallic coatings)