Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Methods for Sewing Threads (Includes all amendments And changes 2/26/2016).
Automatische name übersetzung:
Standard-Prüfverfahren für Nähgarne
NORM herausgegeben am 1.6.2010
Bezeichnung normen: ASTM D204-02(2010)e1
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.6.2010
SKU: NS-19098
Zahl der Seiten: 12
Gewicht ca.: 36 g (0.08 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
breaking strength, strand, colorfastness, diameter, dimensional change, length, sewing thread, textile strand, twist, twist balance, yarn number, Yarn number, Breaking strength/tenacity--textile fabrics/fibers, Colorfastness, Diameter--textile fabrics/fibers, Dimensional change, Fiber length, Sewing thread, Shrinkage--textile fabrics/fibers, Textile fibers, Twist--textiles, Twist balance, ICS Number Code 59.080.20 (Yarns)
Significance and Use | ||||||||||||||||||||||||||||||||||||||||
Acceptance Testing—The test methods in Test Methods D204 for the determination of the properties of sewing thread are considered satisfactory for acceptance testing of commercial shipments of sewing thread, unless specified in the individual test method. These test methods are the best available and are used extensively in the trade. If there are differences of practical significance between reported test results for two laboratories (or more) comparative test should be performed to determine if there is a statistical bias between them using competent statistical assistance. As a minimum, use the samples for such a comparative tests that are as homogeneous as possible, drawn from the same lot of material as the samples that resulted in disparate results during initial testing and randomly assigned in equal numbers to each laboratory. The test results from the laboratories involved should be compared using a statistical test for unpaired data, a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results for that material must be adjusted in consideration of the known bias. |
||||||||||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||||||||||
1.1 These test methods can be used to evaluate sewing threads of any fiber. 1.1.1 The test methods in this standard are intended to evaluate only sewing thread taken from thread holders. 1.2 These test methods only provide for the measurement of sewing thread physical properties. These test methods do not address any other properties that may be important for the satisfactory performance of sewing threads under particular end use conditions. 1.3 These test methods can be used to measure the following properties: |
||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||
|
Historisch
1.6.2010
Historisch
1.2.2012
Historisch
1.7.2012
Historisch
1.7.2012
Historisch
1.1.2011
Historisch
1.10.2013
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-12-22 (Zahl der Positionen: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.